Posted by: xbox360repairsto on: December 14, 2009
When your Xbox 360 breaks, you’re often rather put out because the system itself refuses to do something. You may not be able to get a trouble panel and you may not even be able to eject the disc trapped inside. If you send you Xbox in for official repairs, not only will you end up waiting quite a while, but the company will charge you a great deal of money. They may not even be able to fix your problem. Instead, when you learn to do your own XBox 360 repair, you will be giving yourself the ability to do quick and painless repair to solve the problems within your Xbox.
When a problem occurs with an Xbox 360, there is over a 90% chance that you will be able to fix the problem. If you know what you are doing, making this repair will not be an issue. The 3 Red Light error will not have to give you aggravation anymore.
You should be able to find a guide which can give you detailed, step-by-step instructions that will help you diagnose the problem. From there, a good guide will be able to tell you exactly how to fix these issues. Blindly poking around the machine could only break it even more. This is not something you should be doing.
It should be said, however, that if your Xbox 360 is still covered under warranty, you should turn it in for official repair. The warranty will cover and repairs which are needed and can replace your machine if the console is crushed. If you open the machine, your warranty is considered broken and you will not be able to get a replacement.
The warranty on your console may be expired, however. If this is the case, you should certainly consider making your own Xbox 360 repair, as this will be much cheaper than what official repairs from the manufacturer will be. In order to begin your own repairs, however, you will need to know how to safely take off the protective covers of the system. Otherwise, you may just cause more damage.
Pleasing off the faceplate will be the first step to removing the protective casing from the console. Both the top and the bottom connect into this faceplate and trying to remove either of those pieces first can snap the protections holding them into place. The faceplate can easily be removed using the hole positioned at the bottom.
From here, begin at the gray cover at the bottom. Six tabs hold this into place, which you can access through the venting holes. Using a tool to press down on the tabs, you can pull gently and release the cover.
Removing the top cover will be a little more difficult, although it works in the same manner. The first two tabs will be accessed inside the drive tray. The next two can be found inside the vent holes on the top. You have to find the final two tabs by removing the feet from the Xbox in the rear. Once you have these panels off, however, you will be able to begin your cheap and efficient Xbox 360 repair!
If you are looking for professional help that will solve your Xbox 360 Problems, we recommend the Best Xbox 360 Repair Manual and fix all your Xbox 360 problems by yourself.
